HYPERTHERM POWERMAX65 PLASMA SYSTEM
Plasma cutting system Powermax65 replaceable in the process of cutting conductive metals such as mild steel, stainless steel, aluminum, copperwith a thickness of up to 20 mm.Adjustable output current in the range 20-65 A.
.The device is also used rós for metal gouging without piercing, working in hard-to-reach places.
Unlike the Powermax45 XP, this model is not used for marking, but thanks to its higher amperage it allows gouging with maximum material removal.
The Powermax65 plasma cutter works well as a manual tool, as well as when used with the appropriate accessoriesóon robotic systems or CNC machines. The design of the guard increases the quality of the drawn cut and reduces slag buildup.Equipped with an easy-to-use simplified control panel with LCD screen and a mode selector to choose different types of work like cutting or gouging.
For effective work, the user should provide: permanent power source or generator, gas - compressed air or nitrogen and F5 gas (for work with stainless steel), operator safety equipment (tinted goggles, face shield, gloves, protective clothing and proper ventilation)
.
System advantages:
.-
friendly and easy to use
. -
control panel with LCD screen
. -
mobile - small size and weight
. -
wide application (cutting, gouging)
. -
higher efficiency in comparison with oxy-fuel systems
. -
high quality machined surface
. -
high temperature resistant burners
. -
fast burner disconnect switch
. -
stable air pressure maintenance system
. -
function to maintain unchanged start-up
conditions. -
rich selectionóof consumable accessories and their simple replacement
. -
automatic burner height control
. -
shield to reduce slag accumulation in full capacity pull cutting
. -
Capable of using FineCut consumables for narrow-slit cutting of thin sheet metal up to 4mm max at a maximum current of 45A. Used for cutting complex shapesós with high accuracy and minimizing slag.
CONSTRUCTION AND TECHNICAL PARAMETERS:
.- Parameter: 3 phase 380/400V .
- Input voltage (± 10%): 50-60Hz
- Input current at 9 kW: 15.5/15 A
- Output current: 20-65A .
- Name output voltage: 139V DC
- Work cycle at 40°C: 100%: 46A | 50%: 65A
- Open circuit voltage (OCV): 270V DC
- Gas supply: cutting and gouging: air or nitrogen .
- Recommended inlet gas flow rate:
- Cutting: 189 l/mm at 5.9 bar
- Grooving.
- Gouging: 212 l/mm at 4.8 bar
- Recommended flow rate.
- Required drive power rating: 15kW at 65A full capacity .
- Dimensions (D x W x H): 500x234x455 mm
- Weight with 7.6m burner and 3m power cable: 26kg .
|
Performance . |
Thickness of cut material |
Speed of cut |
||||||
|
Recommended | . |
20 mm | 20 mm 25 mm | 25 mm |
500 mm/min 250 mm/min | 250 mm/min |
||
|
Manual cutoff |
32 mm |
125 mm/min |
||||||
|
Punching in manual application or with automatic burner height control |
16 mm |
not applicable |
