HYPERTHERM POWERMAX 85 PLASMA SYSTEM
Performance plasma system Powermax 85 used for manual, mechanized or robotic cutting of conductive metals: mild and stainless steel, aluminum, copper up to 25 mm thick, and cutting metals up to 38 mm thick. These parameters are made possible by the 85A output current and higher power. Compact, portable and sturdy, while giving a high-quality cutting surface reduces the time-consuming finishing of the cut metal to a minimum. The design of the guard increases the quality of the drawn cut and reduces slag buildup.Equipped with an easy-to-use simplified control panel with LCD screen and a mode selector to choose different types of work like cutting or gouging.
Ideally works in all types of cuttingwith this technology (pull cutting, fine cutting, surface cutting, hard-to-reach areas, mechanized cutting) and mosttypes ofógouging (with maximum control and removal and in hard-to-reach areas). Like the Powermax 65, it is not applicable for precision gouging and marking - the Powermax 45 XP system is dedicated to these purposesó
.
For effective operation, the user should provide: permanent power source or generator, gas - compressed air or nitrogen and F5 gas (for work with stainless steel), operator safety equipment (tinted goggles, face shield, gloves, protective clothing and proper ventilation)
.Benefits of the system:
.-
friendly and easy to use
. -
control panel with LCD screen
. -
mobile - small size and weight
. -
wide application (cutting, marking, gouging and others)
. -
adapted to industrial tasks
. -
increased efficiency in comparison with oxy-fuel systems
. -
high quality machined surface
. -
high temperature resistant burners
. -
fast burner disconnect switch
. -
stable air pressure maintenance system
-
function to maintain unchanged start-up
conditions. -
rich selectionóof consumable accessories and their simple replacement
. -
automatic burner height control
. -
shield to reduce slag accumulation in full capacity pull cutting
. -
FineCut consumables - for narrow-slit cutting of thin sheet metal up to 4mm max at 45A maximum current. Used for cutting complex shapesós with high accuracy and minimizing slag.
CONSTRUCTION AND TECHNICAL PARAMETERS:
.- Parameter: 3 phase 380/400V
- Input voltage (± 10%): 50-60Hz
- Input current at 12.2 kW: 20.5/19.5 amps
- Output current: 25-85A .
- Name output voltage: 143V DC
- Work cycle at 40°C: 100%: 66A | 60%: 85A
- Open circuit voltage (OCV): 270V DC
- Gas supply: cutting and gouging: air or nitrogen .
- Recommended inlet gas flow rate: .
- Cutting: 189 l/mm at 5.9 bar
- Grooving.
- gulp: 212 l/mm at 4.8 bar
- Cutting.
- Required drive power rating: 20kW at full 85A .
- Dimensions (D x W x H): 500x234x455 mm
- Weight with 7.6m burner and 3m power cable: 28kg .
|
Performance . |
Thickness of cut material |
Speed of cut |
||||||
|
Recommended | . |
25 mm | 25 mm 32 mm | 32 mm |
500 mm/min 250 mm/min | 250 mm/min |
||
|
Manual cutoff |
38 mm |
125 mm/min |
||||||
|
Punching in manual application or with automatic burner height control |
20 mm |
not applicable |
