HYPERTHERM POWERMAX 105 PLASMA SYSTEM
High-performance plasma system Powermax 105allows industrial pull, fine and surface cutting of conductive metals such as mild steel, stainless steel, aluminum and copper up to 32 mm thick, and up to 50 mm thick when hand-cut. It also works well in gouging and piercing processes. High performance possible with high power and amperage in the range of 30-105A. The system achieves 80% duty cycle at 105A output current.
Not used for industrial marking. For these purposes
we recommend the Powermax 45XP model.Effectively and quickly works both during manual, cnc machine and robotic cutting.
..
For effective operation, the user should provide: permanent power source or generator, gas - compressed air or nitrogen and F5 gas (for work with stainless steel), operator safety equipment (tinted goggles, face shield, gloves, protective clothing and proper ventilation)
.Benefits of the system:
.-
friendly and easy to use
. -
control panel with LCD screen
. -
mobile - small size and weight
. -
wide application (cutting, marking, gouging and others)
. -
adapted to industrial tasks
. -
increased efficiency in comparison with oxy-fuel systems
. -
high quality machined surface
. -
high temperature resistant burners
. -
fast burner disconnect switch
. -
stable air pressure maintenance system
-
function to maintain unchanged start-up
conditions. -
rich selectionóof consumable accessories and their simple replacement
. -
automatic burner height control
. -
Electrode end-of-life detection function
. -
shield to reduce slag accumulation in full-capacity pulling cuts
-
FineCut consumables - for narrow-slit cutting of thin sheet metal up to 4mm max at 45A maximum current. Used for cutting complex shapesós with high accuracy and minimization of slag.
CONSTRUCTION AND TECHNICAL PARAMETERS:
.- Parameter: 3 phase 400V
- Input voltage (± 10%): 50-60Hz
- Input current at 16.8 kW: 20.5/19.5 A200/208/240/380/400/480/600 V, 58/56/49/28/25/22 A
- Output current: 30-105A
- Name output voltage: 160V DC
- Work cycle at 40°C: 80%: 105A
- Open circuit voltage (OCV): 292V DC
- Gas supply:
- Cutting and gouging: air or nitrogen .
- Recommended inlet gas flow rate:
- Cutting: 217 l/mm at 5.9 bar
- Cutting.
- gulp: 227 l/mm at 4.8 bar
- Recommended flow rate.
- Required drive power rating: 30kW at 105A full current .
- Dimensions (D x W x H): 592x274x508 mm
- Weight with 7.6m burner and 3m power cable: 45kg .
|
Performance . |
Thickness of cut material |
Speed of cut |
||||||
|
Recommended | . |
32 mm | 32 mm 38 mm | 38 mm |
500 mm/min 250 mm/min | 250 mm/min |
||
|
Manual cutoff |
50 mm |
125 mm/min |
||||||
|
Punching in manual application or with automatic burner height control |
22 mm |
not applicable |
