PLCM-E4 CONTROLLER
PLCM-e4 controller controlling CNC devices via USB and Ethernet. The PLCM series is fully compatible with MACH3 software.
The USB connection to the computer must be made via a short, shielded cable with ferrite rings, only then it will allow to ensure a high level of resistance to external factors.
Communication is provided by 3 I / O ports, as well as USB and Ethernet interfaces. The controller has a PWN converter> voltage.
Data:
- Compatible stepper motor driver protocols: STEP / DIR / ENABLE
- Interface: USB type B
- Compatibility: MACH3
- Max STEP signal frequency: 100 kHz
- Number of axles: 6
- Number of entries: 16
Inputs: opto - isolated
- Number of entries: 5
- Inputs: buffered
-Type: LPT
- Number of outputs: 12
- Outputs: buffered
-Type: LPT
- Max input voltage: 15 V
- Logic level of the "0" inputs <1.8 V
- Logic level of the inputs "1"> 2.5 V
- Number of outputs: 12
- Outputs: buffered
- Output voltage: 5 V
-Max output current: 10 mA
- Power supply: 12 V DC
- Maximum power consumption: 300 mA
- Insulation resistance: 500 M?
- Working temperature: 0 ... 40 [° C]
- Weight: 0.24 kg
- Dimensions: 169x126x20 [mm]
Included:
- PLCM-E4 controller
- Ethernet cable
- USB cable, type B
- Software on CD
- Instruction
Correct use of the controller before any changes and setting of connections will be ensured after switching off the power of the controlled system.
Do not connect the power supply terminal ? to ground, earth, etc.
We recommend using a high-quality Ethernet and USB cable (at least 5 categories).
The controller is compatible with version MACH3 R3.043.XXX or newer (upgrade recommended).
