Advanced Technology Machine Solutions

PLCM-e3p controller controlling CNC devices via USB and Ethernet. The PLCM series is fully compatible with MACH3 software. PLCM-e3p is an extended version of the PLCM-e3 controller: it has an additional Ethernet interface. This allows power through the PoE module via a local network switch. However, conventional power is also possible.

The USB connection to the computer must be made via a short, shielded cable with ferrite rings, only then it will allow to ensure a high level of resistance to external factors.

Communication is provided by 3 I / O ports, as well as USB and Ethernet interfaces.

Data:

• Compatible stepper motor driver protocols: STEP / DIR / ENABLE
• Interface: USB type B
• Compatibility: MACH3
• Max STEP signal frequency: 100 kHz
• Number of axles: 6
• Number of entries: 15

- Inputs: buffered

-Max input voltage: 5V CMOS

- Logical level of "0" inputs <1.8V

- Logical level of inputs "1"> 2.5V

• Number of outputs: 36

- Outputs: buffered

- Output voltage : 5V CMOS

-Max output current: 10 mA

• Power supply:

-XP9: 5V DC

- USB: 5 V.

Ethernet: 48 V

• Maximum power consumption: 250 mA
• Insulation resistance: 500 M?
• Working temperature: 0 ... 40 [° C]
• Weight: 0.3 kg
• Dimensions: 86x82x20 [mm]

Included:

• PLCM-E3p controller
• Ethernet cable
• USB cable, type B
• Software on CD
• IDC26-DB25 LPT
• Instruction

Correct use of the controller before any changes and setting of connections will be ensured after switching off the power of the controlled system.

Do not connect the power supply terminal ? to ground, earth, etc.

We recommend using a high-quality Ethernet and USB cable (at least 5 categories).

The controller is compatible with version MACH3 R3.043.XXX or newer (upgrade recommended).